SHOWER SCREENS

Geographe Glass Co measures, supplies and installs custom shower screens for new homes, bathroom renovations and builder projects throughout Busselton and the South West.

Every shower screen is made specifically for the bathroom, allowing us to accommodate different room sizes, wall angles, ceiling lines and shower configurations. From our preferred semi-frameless systems to fully frameless enclosures and fixed walk-in panels, Rob will help you determine the most suitable design for your space.

Choose your screen style.

  • Bathroom shower with glass enclosure, overhead rainfall showerhead, handheld shower, gray tiled walls, a window, and a toilet nearby.

    Semi-frameless

    Our preferred and most frequently installed system, made using 6mm toughened glass with a streamlined perimeter frame. Suitable for alcove, corner and three-sided shower enclosures, with hardware finishes available to coordinate with your tapware.

  • Close-up of water rippling over dark sand at the shoreline with sunlight reflections.

    Fully frameless

    Made using 10mm toughened glass and minimal hardware for a clean, open appearance. Fully frameless screens can incorporate wall-hinged or glass-to-glass doors and are custom-designed to suit both simple and more complex bathroom layouts.

  • Modern bathroom with a shower that has a black shower head, a mirror with backlighting, beige and brown tile walls, a white ceiling with a vent, and a portion of a white countertop with a striped towel.

    Fixed panels

    A single panel of 10mm toughened glass, secured using discreet brackets or channels without a moving door. Fixed panels can be used in walk-in showers, beside baths or as part of a larger custom shower enclosure, with support bars generally required for panels wider than 1200mm.

Choose your configuration.

  • Modern bathroom with a glass shower enclosure, small window with bottles and a soap dispenser, a wall-mounted shelf, and a sink with a wooden cabinet and a mirror.

    Walk-in

    An open shower configuration designed without a traditional enclosed doorway. Walk-in showers generally use one or more fixed glass panels to help contain water while maintaining an open feel, with the layout planned around the showerhead, drainage, floor fall and an entrance width of approximately 800–900mm.

  • Empty bathroom with a glass shower enclosure, a toilet, and unfinished wall with exposed plumbing and fixtures.

    Corner

    Custom-designed for showers positioned within the corner of a bathroom, combining fixed panels with a hinged or selected sliding door. Corner screens are available in semi-frameless and fully frameless configurations to suit the space and desired finish.

  • Enclosed glass shower with light-colored tiled walls, a showerhead, two control knobs, a small built-in soap dish, and a wooden door.

    Three-sided

    Designed for showers that are not enclosed by three existing walls, using three glass sides to create a complete enclosure. Each panel and door is custom-measured, with semi-frameless and fully frameless options available.

  • Custom or unusual spaces

    Created for bathrooms with sloping ceilings, nib walls, tiled ledges, unusual angles or out-of-square walls. Every panel is accurately measured and custom-shaped to suit the finished space, with Rob advising on the most appropriate glass, hardware and configuration.

Glass options for your shower screen

Your shower screen can be made from a range of clear, tinted and privacy glass options.

Available choices include:

  • Clear glass

  • Low-iron glass

  • Frosted glass

  • Reeded or fluted glass

  • Grey-tinted glass

  • Bronze-tinted glass

Clear glass provides a timeless finish, while low-iron glass offers greater clarity and less of the natural green colouring found in standard clear glass.

Frosted, reeded and fluted glass can introduce privacy and texture, while grey and bronze glass provide a more distinctive design feature.

Glass types are generally used consistently within an individual screen rather than combining clear and textured panels in the same enclosure.

A cafe counter with plants hanging from the ceiling, hanging lights, a barista preparing drinks, and wooden tables and chairs in the foreground.
Interior of a cafe with green splashback

Hardware finishes

Available finishes include:

  • Chrome

  • Brushed or satin nickel

  • Matte black

  • White

  • Brass

  • Brushed brass

  • Gunmetal

  • Other selected finishes

Hinges, knobs, brackets, channels and support bars can be coordinated to create a consistent appearance. Shower doors are typically finished with a simple knob handle.

Heidi can show you the available glass and hardware options at our Strelly Street showroom and help you compare combinations for your bathroom.

EnduroShield Protective Coating

EnduroShield protective coating is available as an optional addition to your shower glass.

The coating is applied to the glass to help reduce the adhesion of soap residue, mineral deposits and grime. This can make regular cleaning more manageable and help preserve the appearance of the glass.

Further cleaning and maintenance guidance is available on our dedicated glass-care page.

Enduro Shield glass treatment kit with pre-cleaner, glass treatment spray, cleaning cloth, and box packaging.

Ready to start your splashback journey? Reach out for more info or to arrange a quote.

Contact our team
A kitchen counter with a clear glass splashback showcasing exposed brick wall.